ECET 220 Week 6 Complete DeVry
Just Click
on Below Link To Download This Course:
ECET 220 Week 6 Op Amp
Applications DeVry
ECET 220 Week 6 Lab
Lab 6 of
7: Operational Amplifier Circuits and Applications (30 points)
Scenario/Summary
This
week’s lab will demonstrate the operations of an inverting summing amplifier, a
noninverting summing amplifier, and an instrumental amplifier.
Deliverables
This
lab’s deliverables include the laboratory’s worksheet with its Cover Sheet
(completed in the typed format shown within the worksheet),
Observations/Measurements, and Questions sections.
The
entire lab is worth 30 points. See worksheet and instruction documents for
grading information.
Required
Software
Multisim
Software
Access the
software at https://lab.devry.edu (Links
to an external site.)Links to an external site..
Steps: 1, 2, and 3
Steps: 1, 2, and 3
Lab Steps
STEP 1:
Download the Lab
Download
the W6 Lab Instructions and Worksheet and save
them to your PC.
Note:
These items are found in the Files section.
STEP 2: Lab
Cover Sheet
Report
cover sheets must be completed for all labs. The key parts of these sheets
include the following.
- Objective: A one or two sentence
explanation of the purpose of the lab.
- Results: A statement of the final
output, such as if the circuit and software worked properly.
- Conclusions: Conclusions based on the
results—usually directly related to the purpose of the lab.
- Observations/Measurements:
All results from the lab must be recorded on the cover sheets. Turn
in the cover sheets for grading and retain the remainder of the lab as
worksheets.
STEP 3: Carry
Out Instructions for Theoretical Analysis in Part III: Procedure
Follow
the instructions in Part A: Theoretical Analysis, and record all required
measurements.
In
this part, you will be predicting the characteristics of a parallel
circuit using the various laws that we have discussed for the analysis. Make
sure you go over the exercise problems embedded in the lecture to get a better
understanding. Use proper units along with engineering notation to represent
the electrical quantities.
See
Part A: Theoretical Analysis in the lab’s instructions document.
STEP 4:
Complete MultiSim Simulation Results in Part III: Procedure
Using
MultiSim, perform the steps identified recording the required measurements.
In
this part, you will be using technology to verify your predictions. You will be
using MultiSim to simulate the given circuit. Record the required parameters as
indicated by the meters and calculate the other quantities based on these
measurements. Make sure to copy and paste the circuit from here into the Word
document and let the page adjust to auto fit.
See
Part B: MultiSim Simulation Results in the lab’s instructions document.
STEP 5:
Complete Experimental Breadboard Results in Part III: Procedure
Construct
the circuit. Perform the steps identified by recording the required
measurements.
See
Part C: Experimental Breadboard Results in the lab’s instructions document.
STEP 6:
Complete Results Analysis in Part III: Procedure
Record
the data collected from this experiment and determine the error percentages.
See
Part D: Results Analysis in the lab’s instructions document.
STEP 7:
Transfer Recorded Values to Observations/Measurements
Copy
the recorded results for Questions A, B, C, and D in Part III:
Observations/Measurements section of the lab. This is the page immediately
following the Cover Sheet in the worksheet.
STEP 8:
Answer Questions Section
Make
sure to completely answer all of the questions in this lab’s worksheet.
STEP 9:
Verify Completion of the Cover Sheet
Type
all required information onto the Cover Sheet section in the worksheet.
See
Step 2: Complete the Lab Cover Sheet in the Lab Steps shown above on this page
for specific information.
STEP 10:
Submit Your Deliverables
Submit
only the worksheet with its Cover Sheet, Observations/Measurements, and
Questions sections.
ECET 220 Week 6 CHAPTER PROBLEMS
Chapter
8 Problems: 2, 3, 6, 9, 12, 13, 15, and 16
Chapter
12 Problems: 1 and 2
Refer
to the textbook to answer the problems found at the end of each chapter.
Remember
to submit your assignment for grading.
ECET 220 Week 6 COURSE PROJECT
You
and your team members should focus on future perspectives of the topical area
of your project in this week’s document.
Please
review the Course Project Overview in Introduction and Resources.
Be
sure to submit your assignment.
ECET 220 Week 6 QUIZ
Instructions
Here is some
information about your Quiz.
- Take the quiz after completing the Weeks
5 and 6 Assignments (including readings, lectures, and chapter problems).
- There are six essay questions requiring
calculations for operational amplifier circuits covering COs 5 and 6.
- The entire quiz is worth 50 points and
makes up 5% of the final grade. There are five problems worth 8 points
each and one problem worth 10 points each.
- You have 90 minutes to complete the
quiz.
- Save
frequently because when the time limit is reached, you will
automatically be exited from the exam.
Comments
Post a Comment